If you need to contact us, email is always best but you can call us on 01503 771677 weekdays between 9:00-12:00
GBP £
EUR € USD $

    • Shop

    Home / Aga Range Cooker Parts / Alloy & Steel Parts
    product review overlay image

    Product Description

    The original alloy tube suffers from corrosion as a build up of slightly acidic moisture can damage the bottom of the air tube. Our replacements are made of stainless steel so will suffer much less corrosion.

    The secondary air intake tube runs from the left side base of the exhaust manifold (out of sight if you look in the flue door) all the way to the base of the Aga, then a right angle to behind the grill. It's purpose is to allow the flue to draw air through the room, especially when the thermostat shuts.

    If blocked or damaged your Aga may run very hot and use a lot more fuel!

    This twin tube assembly slots together nicely and you then seal the joints with high heat silicone which we sell here.

    These secondary air intake tubes fit the 2 and 4 oven Aga range cooker Standard models C,CB, E 1941-1973 and are unobtainable from original manufacturers.

    Specifications

    Weight
    2kg

    Secondary Air Intake Tube for Solid Fuel Standard

    VAT Number: 456 3277 75 Registered company: Agafix Spares Ltd
    © Agafix Spares